Limited Offer - 20.9LB
Limited Stock Offer
Selected products are now available at savings of up to 70% off.
$99.95$289.00
20.9 LB CYLINDER
SLATEAUTO • Refrigerant Supply
R32 — refrigerant for HVAC equipment designed around A2L requirements.
Professional-use R32 for air-conditioning and heat-pump systems that are built, labeled and approved for this mildly flammable A2L refrigerant.
20.9 lb / 9.5 kg
HFC refrigerant
A2L — lower toxicity / mildly flammable
ModelR32
Refrigerant typeSingle-component A2L refrigerant
Use profileProfessional / qualified service use
Know what you are ordering.
R32 is difluoromethane, a single-component refrigerant used in a growing range of HVAC equipment. Its A2L classification calls for service procedures appropriate to mildly flammable refrigerants.
ProductR32
Net contents20.9 lb / 9.5 kg
Refrigerant familyHFC refrigerant
Refrigerant typeSingle-component A2L refrigerant
Safety classificationA2L — lower toxicity / mildly flammable
PackagingFactory-sealed service cylinder
Intended useProfessional / qualified service use
Equipment fit
Use R32 only where the system specifically calls for it.
Refrigerant selection should follow the equipment data plate, manufacturer service information and applicable regulations.
Room and split air conditioners that list R32
Confirm the equipment data plate and manufacturer service literature identify R32 before charging or servicing the system.
Heat-pump systems approved for R32 service
Confirm the equipment data plate and manufacturer service literature identify R32 before charging or servicing the system.
Other HVAC equipment whose manufacturer literature specifies R32
Confirm the equipment data plate and manufacturer service literature identify R32 before charging or servicing the system.
Service essentials
Match the refrigerant, tools and procedure to the equipment.
Pressure, lubricant, materials and safety requirements vary by refrigerant and system design. Verify the complete service requirements before opening or connecting a cylinder.
- Use tools, ventilation and ignition-control practices suitable for an A2L refrigerant.
- R32 is not a drop-in substitute for R410A or another refrigerant.
- Observe manufacturer charging limits and all applicable A2L service requirements.
Cylinder care
Inspect, store and handle the cylinder responsibly.
Keep refrigerant secured and follow the cylinder label, safety data sheet and all transport, storage, recovery and disposal requirements.
Package contents
One factory-sealed R32 refrigerant cylinder
Supplied with the stated net refrigerant weight. Inspect the cylinder and label when it arrives and before connecting service equipment.
- Refrigerant: R32
- Net contents: 20.9 lb / 9.5 kg
- Factory-sealed service cylinder
Before service
Verify compatibility and requirements first.
Use only approved equipment for this refrigerant and follow the applicable service, recovery, recycling and disposal rules.
- Read the cylinder label and SDS before handling.
- Use service tools appropriate for R32 and the equipment.
- Follow manufacturer and regulatory requirements for refrigerant handling.
This page is a general purchasing reference. It does not replace the equipment manufacturer’s instructions, the refrigerant safety data sheet, technician training or certification requirements, or applicable federal, state and local regulations.